Animal Forage Shredder Machine For Farm Cattle Sheep Goat Pig Chicken Corn Straw Hay Feed Long Grass

Name: Animal Forage Shredder Machine For Farm Cattle Sheep Goat Pig Chicken Corn Straw Hay Feed Long Grass
SKU: 1044
Price: 599.00 USD
Availability: InStock

$599.00

Wet or Dry Forage Bush

Small Farm Small Scale

Cattle Sheep Goat Pig Chicken

Corn Straw Hay Feed Long Grass Crusher Machine

Animal Forage Shredder Machine

Product name: 4-knife conveyor mower

Rated voltage: 220V / 380V

Supporting power 2.2KW-4KW (the price not include motor)

Motor speed: 2800

Number of blades: 4

Production efficiency: 400-800KG / hour

Yarrow length: about 10-40MM

Dimensions: 1000 * 490 * 800MM

Product name: 6-knife conveyor mower

Rated voltage: 220V / 380V

Supporting power 2.2KW-4KW

Motor speed: 2800

Number of blades: 6

Production efficiency: 500-1000KG / hour

Yarrow length: about 10-50MM

Dimensions: 100008540 * 800MM

Cattle, horse, sheep, donkey, chicken, pigs, goats and the like

The machine belongs to high-power electrical appliances. The starting current and load current are relatively large. After the motor wire is connected, the line must be directly connected to the knife and the circuit breaker. Do not connect the plug. Remember to use a circuit breaker, not a plug socket, cable The line should be thicker, the line is best within 10 meters, do not know please consult an electrician or customer service

It is generally recommended to use a 16A or 20A circuit breaker. The cable is generally 205 square meters (suitable for 2.2 kW motors), 4 square meters (suitable for all single-phase power), and 6 square cable cables. The copper national standard is best. Please do not operate without electricity. Safety first

Notes for use:

(1) When the mower is operating, safety protection equipment must be complete.

(2) Operators must fully understand the performance of the machine. It is strictly forbidden to start the machine when drunk, sick or excessively fatigued. Do not allow people and machines to be close to the moving parts during work.

(3) Adolescents under 16 cannot work alone.

(4) The working area of the mower should be spacious and equipped with fire prevention equipment.

(5) Do not reverse the cutter head.

(6) When feeding grass, the operator should stand on the side of the hopper of the grass-feeding machine. It is strictly forbidden to reach into the cover of the grass-feeding bucket with both hands. At the same time, prevent hardwood, metals, masonry, etc. from entering the machine by accident to avoid damaging to the machine .

(7) The machine must work at the specified speed. It is strictly forbidden to operate at excessive speed and overload.

(8) When replacing the movable and fixed blade fasteners, class 8.8 bolts and class 8 nuts must be used.

(9) If abnormal sounds are found during work, stop the machine immediately for inspection, and cut off the power before the inspection. It is forbidden to discharge the fault when the machine is rotating.

(10) The amount of material to be fed should be appropriate. Too much can easily cause overload and stall, and too little will affect the cutting efficiency.

(11) Before stopping work, put the handle to the 0 position, and let the machine idle for about 2 minutes, wait for the dust in the machine to be blown away, and then weed down.

Voltage / BLADES

Clear